Beyond the Bucket: 5 Typhon Stomp 509 Attachments That Turn Your Machine Into a Money-Maker
Table of Contents
A standard bucket moves dirt. A standard bucket hauls gravel. A standard bucket piles debris. You own a Typhon Stomp 509. You already have the base machine. But the bucket alone leaves money on the table.
The Stomp 509 features a high auxiliary hydraulic flow of 11.4 gallons per minute from the main pump. This flow rating opens the door to serious Typhon Stomp 509 attachments. Attachments turn one machine into five machines. Attachments turn downtime into billable hours. Here are five attachments that expand your capabilities and grow your revenue.
Land clearing jobs pay well. Contractors charge between $200 and $500 per hour for mulching work. The Typhon Stomp 509 runs a forestry mulcher attachment with ease. One specific model weighs 458 pounds. The mulcher spins at 1,200 RPM — chewing through brush, saplings, and overgrown weeds without slowing down.
You can clear lots for new construction. You can clear fence lines for farmers. You can clear trails for property owners. Each job pays by the acre or by the hour.
Attachment Cost
$5,000 – $7,000
Recoup Time
15 – 30 billable hours
Billing Rate
$200 – $500 per hour
Machine Width
41.9 inches — fits between trees larger machines cannot reach
The compact size of your Typhon Stomp 509 lets you slip between obstacles a full-sized machine cannot touch. You take jobs bigger machines cannot reach. You charge a premium for that access.
Fencing contractors need holes. Deck builders need holes. Sign installers need holes. Landscape architects need holes for trees and shrubs. Hand digging takes time and costs labor. A hydraulic auger paired with your Typhon Stomp 509 drills holes in seconds.
The Typhon Stomp 509 lift arm design provides downforce directly into the ground. You guide — the machine does the work. An auger attachment costs $1,500 to $3,000 depending on bit size. You need a set of bits: 6 inches, 9 inches, and 12 inches.
| Ground Condition | Holes per Hour | Earnings per Hour |
|---|---|---|
| Soft Ground | 40 holes | $200 – $600 |
| Hard Ground | 20 holes | $100 – $300 |
Tracked machines do not bounce like wheeled machines. You place each hole exactly where the string line says. Accuracy reduces callbacks. Accuracy builds your reputation.
Debris removal slows down every job. You cut a tree. You trim a hedge. You clear a lot. Now you have piles of branches and logs. A standard bucket cannot grab loose material. A grapple bucket solves this completely.
A grapple bucket has a hinged lid that clamps down on brush and logs. You pick up irregular loads, carry material to the dump truck or chipper, and load trucks faster. The Typhon Stomp 509 hydraulic system operates the grapple lid through the auxiliary hydraulic switch. No extra wiring. No add-on kits. Plug and play.
You increase productivity by 50 percent on cleanup jobs. A job that takes two hours with a standard bucket takes one hour with a grapple. You bid the same price. You finish early. You move to the next job.
Grapple buckets for mini skid steers cost $2,000 to $4,000. Landscapers also use grapples for mulch and compost — materials that spill out of a standard bucket. The grapple holds loose material tight. You transport without spillage and place piles exactly where the customer wants them.
Utility contractors need trenches. Electricians run conduit. Plumbers run water lines. Low voltage installers run data cables. Landscape contractors install drainage pipes. Each trench requires a narrow cut of consistent depth.
The Typhon Stomp 509 accepts a trencher on its href=”https://miniskidsteer.org/destroying-5-myths-why-compact-skid-steer-beats/” target=”_blank”>Typhon Stomp 509 front plate. The carbide-tipped chain spins around a boom, lowers into the ground, and excavates a precise trench as the machine pulls forward. Trencher attachments cost $3,000 to $5,000.
| Job Example | Rate | Earnings |
|---|---|---|
| 200 ft trench @ $4/ft | $4 per foot | $800 in ~2 hours |
| Standard market rate | $2 – $8 per foot | Varies by soil |
Rubber tracks do not damage finished lawns. You cross a customer yard without leaving ruts. You trench next to a house without tearing up flower beds. Rental trenchers leave damage. Your machine leaves a clean trench. Drainage work is repeat business — homeowners with wet basements and property managers with standing water both lead to referrals.
Material handling pays steady money. Construction sites receive pallets of block and brick. Roofing sites receive pallets of shingles. Landscaping yards receive pallets of sod and stone. Someone must move these pallets — that someone can be you.
Pallet forks slide onto the same mounting plate. The Typhon Stomp 509 lift capacity is 925 pounds. You slide under a pallet, lift, drive, and set down. This capacity — enough for sod pallets (600–800 lbs) and most retaining wall block pallets. For heavier loads, you break the pallet in half.
Fork Cost
$500 – $1,500
Rate
$5 – $10 per pallet
Daily Volume
20 pallets on a busy site
Payback Time
2 weeks of part-time work
You cannot buy all five Typhon Stomp 509 attachments at once. Start with one. Match the attachment to your existing customer base.
| Your Work Type | Best First Attachment |
|---|---|
| Tree work / land clearing | Grapple or Forestry Mulcher |
| Fencing / decks / signs | Auger |
| Drainage / utilities | Trencher |
| General site work / deliveries | Pallet Forks |
Rent attachments before you buy. If the rental pays for itself repeatedly, buy the attachment. Always verify your hydraulic specs — the Typhon Stomp 509 runs at 11.4 GPM auxiliary flow and 2,500 PSI. Most mini skid steer class attachments work within these ranges. Buy attachments with universal 2-inch pin mount plates — attachments from Toro Dingo, Vermeer, and other brands fit your machine. You are not locked into one brand.
| Item | Detail |
|---|---|
| Billing rate | $85/hr machine + operator |
| Annual billable hours | 1,000 hrs |
| Gross annual revenue | $85,000 |
| Equipment costs covered by | Month 3 |
| Fuel cost (Kubota engine) | ~0.8 gal/hr vs 2.5 gal/hr full-size — saves $10/hr |
Each attachment increases your billable rate. A standard machine rental costs $300/day. A machine with a mulcher commands $600/day. You keep the difference.
- Check hydraulic hoses before each use — cracks or leaks cost more in downtime than the hose itself
- Grease grapple hinges, auger drive shafts, and trencher chain sprockets daily
- Store attachments indoors or under cover — sunlight degrades hoses, rain rusts tines
- Inspect mulcher and trencher cutting teeth after each job — dull teeth waste fuel and time
- Replace teeth in sets for even wear across the full cutting surface
- Post in local Facebook community groups with photos of your machine and attachment installed
- Call local fencing companies — offer a discounted first job to start the relationship
- Visit landscape supply yards and leave business cards with equipment operators
- List on Thumbtack and TaskRabbit using keywords like auger hole digging, brush mulching, and property cleanup
- Distribute flyers at building material suppliers and equipment rental counters
🔗 Watch Full Video
Watch on YouTube →The bucket moves dirt. The Typhon Stomp 509 attachments make money. Start with one attachment, master it, build a reputation, then add the next. Your compact machine is already capable — the right attachment unlocks it.
Explore the Typhon Stomp 509 →
